View RN1101F07_4125396.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

RN1101FRN1106F
TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process)
RN1101F,RN1102F,RN1103F RN1104F,RN1105F,RN1106F
Switching, Inverter Circuit, Interface Circuit And Driver Circuit Applications
Unit in mm With built-in bias resistors Simplify circuit design Reduce a quantity of parts and manufacturing process Complementary to RN2101F~RN2106F
Equivalent Circuit And Bias Resister Values
Type No. RN1101F RN1102F RN1103F RN1104F RN1105F RN1106F R1 (k) 4.7 10 22 47 2.2 4.7 R2 (k) 4.7 10 22 47 47 47
JEDEC EIAJ TOSHIBA
2-2H1A
Absolute Maximum Ratings (Ta = 25C)
Characteristic Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature range RN1101F~1106F RN1101F~1106F RN1101F~1104F RN1105F, 1106F Symbol VCBO VCEO VEBO IC PC Tj Tstg Rating 50 50 10 5 100 100 150 -55~150
Weight: 2.3 mg
Unit V V V mA mW C C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
1
2007-11-01
RN1101FRN1106F
Electrical Characteristics (Ta = 25C)
Characteristic Collector cut-off current RN1101F ~1106F RN1101F RN1102F Emitter cut-off current RN1103F RN1104F RN1105F RN1106F RN1101F RN1102F DC current gain RN1103F RN1104F RN1105F RN1106F Collector-emitter saturation voltage RN1101F ~1106F RN1101F RN1102F Input voltage (ON) RN1103F RN1104F RN1105F RN1106F RN1101F ~1104F RN1105F, 1106F Transition frequency Collector Output capacitance RN1101F ~1106F RN1101F ~1106F RN1101F RN1102F Input resistor RN1103F RN1104F RN1105F RN1106F RN1101F ~1104F Resistor ratio RN1105F RN1106F R1/R2 R1 VI (ON) VCE = 0.2V, IC = 5mA VCE (sat) IC = 5mA, IB = 0.25mA hFE VCE = 5V, IC = 10mA IEBO VEB = 10V, IC = 0 Symbol ICBO ICEO Test Circuit Test Condition VCB = 50V, IE = 0 VCE = 50V, IB = 0 Min 0.82 0.38 0.17 0.082 VEB = 5V, IC = 0 0.078 0.074 30 50 70 80 80 80 1.1 1.2 1.3 1.5 0.6 0.7 1.0 VI (OFF) VCE = 5V, IC = 0.1mA 0.5 fT Cob VCE = 10V, IC = 5mA VCB = 10V, IE = 0, f = 1MHz 3.29 7 15.4 32.9 1.54 3.29 0.9 0.0421 0.09 250 3 4.7 10 22 47 2.2 4.7 1.0 0.0468 0.1 0.8 6 6.11 13 28.6 61.1 2.86 6.11 1.1 0.0515 0.11 k MHz pF Typ. 0.1 Max 100 500 1.52 0.71 0.33 0.15 0.145 0.138 0.3 2.0 2.4 3.0 5.0 1.1 1.3 1.5 V V V mA Unit nA
Input voltage (OFF)
2
2007-11-01
RN1101FRN1106F
3
2007-11-01
RN1101FRN1106F
4
2007-11-01
RN1101FRN1106F
5
2007-11-01
RN1101FRN1106F
6
2007-11-01
RN1101FRN1106F
Type Name
Marking
RN1101F
RN1102F
RN1103F
RN1104F
RN1105F
RN1106F
7
2007-11-01
RN1101FRN1106F
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN GENERAL
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
8
2007-11-01

▲Up To Search▲

Price & Availability of RN1101F07

	To Download RN1101F07 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .